Chronological Thread 

< Chronological >      < Thread >

---

On Dec 19, 2010, at 2:41 PM, Mohd Arif wrote:
>
> Hi All,
> Hey Michael, Thanks for the reply. But here is a small twist.
>
> The link http://sctp.fh-muenster.de/sctp-testtool.html/ states
> that in order to use the stt tool "the operating system must NOT provide
> kernel SCTP support."
> I have to use a tool to verify the changes that will be
> done in kernel SCTP code. So I think the stt tool can’t be used in my case.
> Kindly confirm.
You need two systems: One being the system under test (SUT) which runs your
modified
kernel stack, and the other one, which runs the test tool and does not have an
SCTP kernel implementation.
>
> Further I found one more tool at
> http://sctp.fh-muenster.de/m3ua-testtool.html/ which states that “the
> operation system must provide kernel SCTP support.”
> But again the tool is guile based and I am clueless about
> its usage. Kindly help.
This is for M3UA tests, not for SCTP tests.
>
> My sole purpose is to get an application or tool which can
> create or generate SCTP data packets (duplicate packets, very low and very
> high TSN packets etc)
So you need two systems as indicated above...

Best regards
Michael
>
> Time is running out for me. It is very urgent and I will be really grateful
> if anybody can suggest.
>
> Thanks,
> Arif
>
> -----Original Message-----
> From: Michael Tüxen
> [mailto:Michael.Tuexen AT micmac.franken.de]
>
> Sent: Saturday, December 18, 2010 4:35 PM
> To: Mohd Arif
> Cc:
> sctp-discussion AT sctp.de
> Subject: Re: [SCTP-Discussion] how to use stt tool? Please help...
>
> On Dec 18, 2010, at 10:06 AM, Mohd Arif wrote:
>
> > Hi All,
> >
> > Please help!!!
> >
> > I want to verify the SCTP implementation by generating and configuring
> > different SCTP packets like high TSN data chunks, duplicate data chunks
> > or duplicate INIT chunks.
> >
> > To achieve the same, I have installed stt-0.9.9b and download sctp-tests
> > from following location:
> > http://sctp.fh-muenster.de/sctp-testtool.html/
> >
> > I am new to guile based tools and don't know how they work.
> > Please help me out and give me steps to generate the packets using stt
> > tool.
> >
> > In the meantime i am trying to get the usage of the software.
> Hi Arif,
>
> you might want to take a look at the implementation of the ETSI conformance
> tests to figure out how to write simple tests.
>
> Best regards
> Michael
> >
> > Thanks,
> > Arif
> >
> >
> > DISCLAIMER:
> > -----------------------------------------------------------------------------------------------------------------------
> > The contents of this e-mail and any attachment(s) are confidential and
> > intended
> > for the named recipient(s) only.
> > It shall not attach any liability on the originator or NECHCL or its
> > affiliates. Any views or opinions presented in
> > this email are solely those of the author and may not necessarily reflect
> > the
> > opinions of NECHCL or its affiliates.
> > Any form of reproduction, dissemination, copying, disclosure,
> > modification,
> > distribution and / or publication of
> > this message without the prior written consent of the author of this
> > e-mail is
> > strictly prohibited. If you have
> > received this email in error please delete it and notify the sender
> > immediately. .
> > -----------------------------------------------------------------------------------------------------------------------
> >
> > _______________________________________________
> > sctp-discussion mailing list
> > sctp-discussion AT sctp.de
> > http://www.sctp.de/mailman/listinfo/sctp-discussion
>
>
> DISCLAIMER:
> -----------------------------------------------------------------------------------------------------------------------
>
> The contents of this e-mail and any attachment(s) are confidential and
> intended
> for the named recipient(s) only.
> It shall not attach any liability on the originator or NECHCL or its
> affiliates. Any views or opinions presented in
> this email are solely those of the author and may not necessarily reflect
> the
> opinions of NECHCL or its affiliates.
> Any form of reproduction, dissemination, copying, disclosure, modification,
> distribution and / or publication of
> this message without the prior written consent of the author of this e-mail
> is
> strictly prohibited. If you have
> received this email in error please delete it and notify the sender
> immediately. .
> -----------------------------------------------------------------------------------------------------------------------
>

---

• [SCTP-Discussion] how to use stt tool? Please help..., Mohd Arif, 12/18/2010
  • Re: [SCTP-Discussion] how to use stt tool? Please help..., Michael Tüxen, 12/18/2010
  • <Possible follow-up(s)>
  • RE: [SCTP-Discussion] how to use stt tool? Please help..., Mohd Arif, 12/19/2010
    • Re: [SCTP-Discussion] how to use stt tool? Please help..., Michael Tüxen, 12/19/2010
  • RE: [SCTP-Discussion] how to use stt tool? Please help..., Mohd Arif, 12/20/2010
    • Re: [SCTP-Discussion] how to use stt tool? Please help..., Michael Tüxen, 12/20/2010
  • RE: [SCTP-Discussion] how to use stt tool? Please help..., Mohd Arif, 12/21/2010

---

Archive powered by MHonArc 2.6.19+.